Alacoque Garage Doors August 07th, 2018 - 11:37:39
In contrast to an overhead type of garage door be it sectional or single panel roll up doors have a totally different type of operating system. When these doors are used they can be concealed in an overhead or under mounted trough. These doors operate similarly to a roll top desk door except for how they are stored when not in the closed position. They normally coil as they are retracted and require significant gear trains to reduce the effort required to move these doors up and down into position. Often the forces needed to move these roll up doors require a reduction type of transmission that allows a very heavy door to be operated effortlessly.
In response to the inherently dangerous old style garage spring issues as above a newer and safer system for opening the overhead garage door was created. The idea was to transfer the load or weight of the door via a cable and pulley system to a vertical rod now equipped with a torsion (twisted) spring. This type of spring is installed with specialty hardware and bolts to a fixed plate at one end while the entire spring is installed around a horizontal pipe. This load balancing device is normally installed directly over the header of the garage opening. Using appropriate cables connectors and pulleys the weight of the garage door is transferred into the torsion spring system. The difference between the old style stretched spring and the newer torsion spring is the way that the spring energy is stored. With the old style stretched spring the energy is stored and released by pulling on the spring or returning the spring to its un-stretched condition.
There is a wide range as well when it comes to choosing the material of the garage door. You can choose any one from Steel fiberglass plain old wood or polyethylene base don your requirements. Steel doors are the strongest and most durable whereas high density polyethylene doors never dent rust or fade and do not require to be repainted. Fiberglass doors can also be an option if you want some natural light to pass through as these materials are translucent and also maintenance free. Conventional wooden doors would well fit into your budget and requirements but the low initial cost might be deceiving as the maintenance cost is relatively higher than the other options; wooden doors require regular check ups for warps and rotting.
They are available as a prefabricated kit or built as a custom design to complement the dacor of any building. Commercial warehouse type installations often dictate higher security requirements. A good choice for this security type of door is the "roll-up" style that resembles a roll top desk type of door. This door can be manufactured with a variety of materials that can be as strong as the adjacent walls making forced entry through this opening very difficult. Other common commercial installations include light weight aluminum single or sectional panel doors. These doors function more for closing off an already secured area than for assuring point security.